1. Manuals
  2. Brands
  3. Wyse Manuals
  4. Touch terminals
  5. Winterm 3000 Series
  6. User manual

Wyse Winterm 3000 Series User Manual

Windows-based terminals
Hide thumbs
Table of Contents

Advertisement

Quick Links

Winterm
3000 Series
™
Windows
-based Terminal
®
Users Guide
Issue: 070601

Advertisement

Table of Contents
loading

Related Manuals for Wyse Winterm 3000 Series

Summary of Contents for Wyse Winterm 3000 Series

  • Page 1 Winterm 3000 Series ™ Windows -based Terminal ® Users Guide Issue: 070601...
  • Page 2 This page intentionally blank.
  • Page 3 Winterm 3000 Series ™ Windows -based Terminal ® Users Guide Issue: 070601 883630-05 Rev. A July 2001 Wyse Technology Inc. 3471 North First Street San Jose, CA 95134-1803...
  • Page 4 This page intentionally blank.
  • Page 5 Trademarks WYSE is a registered trademark and Winterm is a trademark of Wyse Technology Inc. ICA is a registered trademark and MetaFrame is a trademark of Citrix Systems Inc. Microsoft, Windows, Windows CE, Windows NT, and Windows Terminal Server are registered trademarks of Microsoft Corporation.
  • Page 6 You have the right to use this Firmware by loading it onto a computer(s) containing the capability of transferring the Firmware (in whole or in part) to the Wyse-manufactured Terminal. You also have the right to load the Application onto a computer(s) containing the capability of communicating to the Wyse-manufactured Terminal.
  • Page 7 Term This License becomes effective when you unpack and use the terminal. This License will terminate automatically if you fail to comply with any of its terms or conditions, including any attempt to modify the Software. Upon termination for any reason, you agree that you will destroy all copies of the Software and related material or return all such copies to Licensor.
  • Page 8 California of the United States of America. No Third-Party Beneficiary Rights No provisions in any agreement between Wyse Technology and a Third-Party Producer shall be deemed to provide or create any third-party beneficiary rights or any other rights of any kind to Licensee.
  • Page 9 ® ® EULA for Microsoft Windows NT Embedded Operating System, Microsoft ® Windows CE Operating System for Embedded Systems, Microsoft ® ® Windows CE Operating System for Windows -based Terminals, and Desktop ® Applications for Windows CE Operating System for Embedded Systems IMPORTANT—READ CAREFULLY: This End User License Agreement (EULA) is a legal agreement between you (either an individual or a single entity) and the manufacturer (MANUFACTURER) of the special...
  • Page 10 viii • No Liability for Consequential Damages. [MANUFACTURER AND/OR] MANUFACTURER’S SUPPLIERS SHALL NOT BE HELD TO ANY LIABILITY FOR ANY DAMAGES SUFFERED OR INCURRED BY YOU (INCLUDING, BUT NOT LIMITED TO, GENERAL, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION AND THE LIKE), ARISING FROM OR IN CONNECTION WITH THE DELIVERY, USE OR PERFORMANCE OF THE SOFTWARE.
  • Page 11 • Desktop Software (for CE Full products only). Your Embedded System package may include software contained on a CD-ROM disc labeled “Desktop Software for ® ® Microsoft Windows CE” (“Desktop Software”). If Desktop Software is included with your Embedded System, you may install and use the component(s) of the Desktop Software in accordance with the terms of the end user license agreement provided with such component(s).
  • Page 12 EXPORT RESTRICTIONS You acknowledge that SOFTWARE is of US-origin. You agree to comply with all applicable international and national laws that apply to the SOFTWARE, including the U.S. Export Administration Regulations, as well as end-user, end-use and country destination restrictions issued by U.S. and other governments. For additional information on exporting the SOFTWARE, see http://www.microsoft.com/exporting/.
  • Page 13 FCC Statement This equipment has been tested and found to comply with the limits for either Class A or Class B digital devices (refer to “Terminal Requirements Compliance”), pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 14 Class B This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe B prescrites dans le Réglement sur le brouillage radioélectrique édicté...

  • Page 15: Table Of Contents

    Contents About the Users Guide Guide Overview 1 Guide Conventions 2 Text Format 2 User Interface Menu Control 3 Introducing the 3000 Series Windows-based Terminals Models Summary 5 Model 3200LE Terminal 6 Model 3230LE Terminal 7 Model 3320SE Terminal 8 Model 3350SE Terminal 9 Model 3360SE Terminal 10 Model 3630LE Terminal 11...
  • Page 16 Keyboard and Mouse Configuration Keyboard 40 Mouse 42 Managing Connections Configuring a Connection 43 Making a Connection 43 Ending a Connection 44 Shutting Down the Terminal 45 Browser Configuration Adding a Browser Connection 48 Multiple Sessions Setting Up Multiple Sessions 51 Managing Multiple Sessions 51 Manipulating Multiple Sessions 51 Getting Help...
  • Page 17 List of Figures Model 3200LE Terminal and Connectors 6 Model 3230LE Terminal and Connectors 7 Model 3320SE Terminal and Connectors 8 Model 3350SE Terminal and Connectors 9 Model 3360SE Terminal and Connectors 10 Model 3630LE Terminal and Connectors 11 Model 3720SE Terminal and Connectors 12 Model 3730LE Terminal and Connectors 13 Terminal Login Dialog Box 17 Administrator-Level Terminal Properties Screen 18...
  • Page 18 This page intentionally blank.

  • Page 19: About The Users Guide

    • Browser Configuration • Multiple Sessions • Getting Help This guide contains information about: • WBT features and management • The user interface Note The on-line version of this guide features a link to the Wyse home page at www.wyse.com.

  • Page 20: Guide Conventions

    Guide Conventions Text Format Table 1 lists the text format conventions used in this document. Table 1 Text Format Convention Where Used Italic New term, book title, or emphasis. Bold Screen display, keycaps, and user input. Indicates a note. A note adds information. Note Indicates a caution.

  • Page 21: User Interface Menu Control

    User Interface Menu Control Table 2 describes the command buttons used for user interface menu control on a 3000 Series WBT. Table 2 User Interface Menu Control Command Button Function Found in the upper right corner of a dialog box. Click on this command button to quit a dialog box or properties sheet without saving changes.
  • Page 22 This page intentionally blank.

  • Page 23: Introducing The 3000 Series Windows-Based Terminals

    Models Summary All Winterm 3000 Series terminals with at least 8 MB of RAM are supported by version 3.5.1 of the terminal software. Currently available Wyse Winterm 3000 Series terminals are: •...

  • Page 24: Model 3200Le Terminal

    Power supply • Power cord (with domestic versions only) • Keyboard (with domestic versions only) • Mouse • Installation and user information (also available at www.wyse.com) Note An optional mounting kit is also available. For more information call 1-800-800-WYSE (9973).

  • Page 25: Model 3230Le Terminal

    Power supply • Power cord (with domestic versions only) • Keyboard (with domestic versions only) • Mouse • Installation and user information (also available at www.wyse.com) Note An optional mounting kit is also available. For more information call 1-800-800-WYSE (9973).

  • Page 26: Model 3320Se Terminal

    Desktop mounting stand • Keyboard (with domestic versions only) and mouse • Installation and user information (also available at www.wyse.com) Note Optional wall-mount and cable shroud kits (P/N 920190-01 and P/N 920198-01) are available. For more information call 1-800-800-WYSE (9973).

  • Page 27: Model 3350Se Terminal

    Power cord (with domestic versions only) • Desktop mounting stand (integral) • Keyboard (with domestic versions only) and mouse • Installation and user information (also available at www.wyse.com) Note An optional wall-mount kit (P/N 920189-01) is available. For more information call 1-800-800-WYSE (9973).

  • Page 28: Model 3360Se Terminal

    Desktop mounting stand • Keyboard (with domestic versions only) and mouse • Installation and user information (also available at www.wyse.com) Note Optional wall-mount and cable shroud kits (P/N 920190-01 and P/N 920198-01) are available. For more information call 1-800-800-WYSE (9973).

  • Page 29: Model 3630Le Terminal

    Figure 1-6 Model 3630LE Terminal and Connectors The following items are provided with Model 3630LE terminals: • Power supply • Power cord (with domestic versions only) • Keyboard (with domestic versions only) and mouse • Installation and user information (also available at www.wyse.com)

  • Page 30: Model 3720Se Terminal

    Model 3720SE terminal and its connectors. Figure 1-7 Model 3720SE Terminal and Connectors The following items are provided with Model 3720SE terminals: • Power cord • Keyboard (with domestic versions only) and mouse • Installation and user information (also available at www.wyse.com)

  • Page 31: Model 3730Le Terminal

    Figure 1-8 Model 3730LE Terminal and Connectors The following items are provided with Model 3730LE terminals: • Power cord (with domestic versions only) • Keyboard (with domestic versions only) • Mouse • Installation and user information (also available at www.wyse.com)

  • Page 32: 3000 Series Terminal Features

    3000 Series Terminal Features The following table lists the features of each WBT model. Table 1-1 Terminal Features Feature 3200LE 3230LE 3320SE 3350SE 3360SE 3630LE 3720SE 3730LE Windows 3.1, Windows 95, Windows 98, and Windows NT applications via Windows 2000 RDP and ICA 3.x application compliant ICA server connections via serial cable 10Base-T network communications...
  • Page 33 Table 1-1 Terminal Features, Continued Feature 3200LE 3230LE 3320SE 3350SE 3360SE 3630LE 3720SE 3730LE PCMCIA support for CISCO Aironet™ Wireless Ethernet Card Network Time Services Microsoft Internet Explorer 4 support...
  • Page 34 Chapter 1 This page intentionally blank.

  • Page 35: General Terminal Information

    General Terminal Information Logging On If security is enabled (an administrative function), when you turn on your WBT the Terminal Login dialog box shown below (see Figure 2-1) displays (unless your system administrator has configured your terminal for automatic login with your User Name and Password).

  • Page 36: Access Levels

    Chapter 2 Access Levels The terminal allows three different levels of access: Administrator, User, and Guest. These levels are assigned to specific User Names by your System Administrator. Each access level grants certain rights to the user according to the level specified, Administrator having total access and control over all functions of the terminal, User having control over all except the Security functions, and Guest having minimal rights.

  • Page 37: User-Level Terminal Properties Screen

    General Terminal Information Figure 2-3 User-Level Terminal Properties Screen...

  • Page 38: Guest-Level Terminal Properties Screen

    Figure 2-4 Guest-Level Terminal Properties Screen Additionally, the Configure tab in the Winterm Connection Manager window is only available to Administrator-level users. Information regarding the use of Administrator-level functions is available in the Winterm 3000 Series Windows-based Terminal Administrators Guide. Note If you turn on your WBT and the Setup Wizard displays, contact your system administrator.

  • Page 39: Version And Copyright Information

    General Terminal Information The connection manager allows you to connect to one or more servers. See Chapters 6 and 8 for more information about connections and sessions. Figure 2-5 Winterm Connection Manager Version and Copyright Information The General properties sheet includes information about the current software on your terminal and copyright statements.

  • Page 40: General Properties Sheet

    Chapter 2 Figure 2-6 General Properties Sheet Read the information on this sheet. Click on Close to return to the Winterm Connection Manager. By default Cancel and Apply are deactivated. Note The amount of RAM shown on this properties sheet depends on the model of terminal in use.

  • Page 41: System Information

    General Terminal Information System Information The SysInfo properties sheet contains terminal and network information. See Figure 2-7. Click on the SysInfo tab to invoke this properties sheet. Read the information on this sheet. Click on Cancel or Apply to return to the Winterm Connection Manager. Figure 2-7 SysInfo Properties Sheet...
  • Page 42 Chapter 2 This page intentionally blank.

  • Page 43: Display Configuration

    Display Configuration From the Winterm Connection Manager (Figure 2-5) press F2 on your keyboard. The Terminal Properties dialog box displays (see Figure 3-1). The Display properties sheet available in this dialog box allows you to configure display screen resolution and turn on the energy savers functions.

  • Page 44: Display Screen Resolution

    Chapter 3 Display Screen Resolution This paragraph discusses display screen resolution referring to Figure 3-1 and using Table 3-1. Figure 3-1 Display Properties Sheet...

  • Page 45: Display Screen Resolution

    Display Configuration Table 3-1 Display Screen Resolution Display Properties Sheet Area Called... To Use... Desktop Area and The scrolling list box displays the current terminal display Refresh Frequency screen resolution. Scroll and click on a selection to change the resolution. The default is 640 x 480 @ 60 Hz. Test Click on this command button to test the setting selected in the above scrolling list box.
  • Page 46 Chapter 3 Table 3-1 Display Screen Resolution, Continued Display Properties Sheet Area Called... To Use... After several seconds the following dialog box displays: Follow the instructions in the dialog box. If you click on Yes, you will return to the Display properties sheet. If you click on No, the following dialog box will display: Follow the instructions in the dialog box.

  • Page 47: Energy Savers

    Display Configuration Energy Savers This paragraph discusses energy saving features, referring to Figure 3-1 and using Table 3-2. Table 3-2 Energy Savers Display Properties Sheet Area Called... To Use... Enable Energy Savers Click on this check box to activate the energy saver functions.

  • Page 48: Terminal Settings Change Dialog Box

    Chapter 3 To finish, click on Apply, then Close. The following dialog box displays: Figure 3-2 Terminal Settings Change Dialog Box You can also click on Cancel to cancel any changes and return to the Winterm Connection Manager.

  • Page 49: Integrated Terminal Monitor Adjustments

    Integrated Terminal Monitor Adjustments Model 3630LE Figure 4-1 shows the user controls available on the Model 3630LE flat-panel terminal. They are described in Table 4-1. Figure 4-1 Model 3630LE User Controls Table 4-1 Model 3630 User Controls Control Definition Power Button and Press the double-action push button to turn power on and Power LED off.

  • Page 50: Model 3720Se

    Chapter 4 Table 4-1 Model 3630 User Controls, Continued Control Definition Brightness Increases or decreases the strength (lightness or dimness) of the display image. Volume Controls the audio volume from the speakers, or if the headphones are plugged in the speakers will be disabled and the headphone volume is controlled.

  • Page 51: Model 3720Se Osd (On-Screen Display) Menu

    Integrated Terminal Monitor Adjustments Instructions for using the terminal’s front panel are listed in the following table. Table 4-2 Model 3720SE Terminal Front Panel Button Function MENU (OSD) To use: Press the MENU button to invoke the OSD (refer to the following figure).

  • Page 52: Model 3720Se Recall Mode

    Chapter 4 Table 4-3 Model 3720SE OSD Menu Function Description H-CENTER H-CENTER adjusts the screen’s horizontal center from left to right. H-SIZE H-SIZE adjusts the screen’s width. V-CENTER V-CENTER adjusts the screen’s vertical center, top to bottom. V-SIZE V-SIZE adjusts the screen’s height. PIN (Pincushion) adjusts screen distortion, where both sides of the display sag inward toward the center or bow outward from it.

  • Page 53: Model 3730Le

    Integrated Terminal Monitor Adjustments Model 3730LE This section explains the various user adjustments provided on the Model 3730LE terminal monitor. Figure 4-5 Model 3730LE Display Controls Operation Press the OSD button to access the OSD master picture, which includes a resolution and frequency indicator as well as the Adjustment Window.

  • Page 54: Volume

    Chapter 4 Volume Used to adjust audio volume. Note The microphone (Mic) input is not yet supported by software on the Model 3730LE. Auto Registration Adjustments are automatically registered after the Adjust switch is pressed, or by letting the display automatically close the windows after 15 seconds of inactivity. Recall factory default settings To cancel adjustments and recall presets (revert to factory settings), press the Select - and Adjust - buttons simultaneously to activate the recall function.
  • Page 55 Integrated Terminal Monitor Adjustments Table 4-4 Screen Control Definitions, Continued Control Definition Parallel Corrects the image shape to a rectangle. Color temperature Adjusts the color temperature. When you select 9300K or 6500K mode, you can restore 9300K or 6500K settings to the factory preset values. When you select User mode, you can change Red or Blue video output gain as desired.
  • Page 56 Chapter 4 This page intentionally blank.

  • Page 57: Keyboard And Mouse Configuration

    Keyboard and Mouse Configuration From the Winterm Connection Manager you can configure your terminal’s keyboard and mouse. Press F2 on your keyboard. The Terminal Properties dialog box displays. In this dialog box is a properties sheet you can use for setting up your keyboard and mouse. It is the Input properties sheet.

  • Page 58: Keyboard

    Chapter 5 Keyboard This paragraph discusses configuring your keyboard, referring to Figure 5-1 and using Table 5-1. Table 5-1 Keyboard Input Properties Sheet Area Called... To Use... Keyboard Use this group box to configure your keyboard: Locale Use this scroll list to select a language for the keyboard: Belgian Dutch Japanese Belgian French...
  • Page 59 Keyboard and Mouse Configuration Table 5-1 Keyboard, Continued Input Properties Sheet Area Called... To Use... Character Repeat The group box used to set the keyboard character repeat parameters: Repeat Delay Use this slider control to adjust the repeat delay of keyboard characters.

  • Page 60: Mouse

    Chapter 5 Mouse This section discusses configuring your mouse referring to Figure 5-1 and using Table 5-2. Table 5-2 Mouse Input Properties Sheet Area Called... To Use... Mouse Use the following dialog box to configure mouse attributes. Properties... Click on this command button to invoke the Mouse Properties dialog box.

  • Page 61: Managing Connections

    Managing Connections The Winterm Connection Manager is designed to help you manage your network connections. The manager consists of the Connections properties sheet and the Configure properties sheet. With it you can configure, make, and end connections, and gracefully shut down the terminal. Figure 2-5 shows the Winterm Connection Manager. The Winterm Connection Manager is automatically invoked when the terminal is turned Note If you turn on your WBT and the Setup Wizard displays, contact your system...

  • Page 62: Ending A Connection

    Chapter 6 Table 6-1 identifies and describes each of functions of the properties sheet. Table 6-1 Connections Properties Sheet Function Description Connection Name This application window lists the connections that you can use. Default RDP Connection and Default ICA Connection are the default connections for the window.

  • Page 63: Shutting Down The Terminal

    Managing Connections Shutting Down the Terminal Use the Shutdown Window dialog box to log off, shut down, or shut down and restart the terminal. Figure 6-1 shows the Shutdown Window dialog box. Figure 6-1 Shutdown Window Dialog Box Click on the Shutdown command button in the Winterm Connection Manager to invoke this dialog box.
  • Page 64 Chapter 6 This page intentionally blank.

  • Page 65: Browser Configuration

    To display the amount of flash memory installed in your terminal, refer to the Sysinfo properties sheet, described in "System Information." Terminals with less than 16 MB of flash memory may be upgraded with additional memory to support the factory image that includes Internet Explorer. For more information call 1-800-GET-WYSE (1-800-438-9973).

  • Page 66: Adding A Browser Connection

    Chapter 7 Adding a Browser Connection When you first power-up your Winterm you will see the Winterm Connection Manager. Figure 7-2 Winterm Connection Manager The Winterm Connection Manager allows you to configure your local browser. Click on the Configure tab to begin setting up your browser. Note The operating system installed on the terminal supports 40-bit encryption.

  • Page 67: New Connection Dialog

    Browser Configuration Click the Add button and choose Internet Explorer from the drop-down box and click on the OK button. Figure 7-4 New Connection Dialog Type a name for your browser connection in the title box of the Internet Explorer Setup dialog box and click OK.
  • Page 68 Chapter 7 This page intentionally blank.

  • Page 69: Multiple Sessions

    Multiple Sessions Setting Up Multiple Sessions To start multiple sessions: 1. Click on a connection in the Connection Name list in the Winterm Connection Manager to launch your first session. (See “Managing Connections” for more information about configuring connection parameters). 2.
  • Page 70 Chapter 8 This page intentionally blank.

  • Page 71: Getting Help

    Getting Help Getting Help provides solutions to problems that may occur while you are using your terminal. Troubleshooting Your Terminal Troubleshooting the Terminal, Table 9-1, lists some common problems and the solutions to those problems. Table 9-1 Troubleshooting the Terminal Problem Solution When you turn on the terminal nothing...
  • Page 72 Chapter 9 Table 9-1 Troubleshooting the Terminal, Continued Problem Solution You are not able to make a network 1. Verify that the network cable is connection using the Winterm properly attached to the terminal. Connection Manager. 2. Verify that the network cable is connected to a hub or other network outlet.
  • Page 73 Glossary 1 Glossary The following glossary is a list of commonly used terms in this guide. Term Definition 10Base-T One of several adaptations of the Ethernet (IEEE 802.3) standard for Local Area Networks (LANs). The 10Base-T standard (also called Twisted Pair Ethernet) uses a twisted-pair cable with a maximum length of 100 meters.
  • Page 74 Glossary 2 Download To transfer data from a processing unit to an attached device. For example, from a host to the terminal. Data Set Ready. A hardware signal sent by a communications device to indicate readiness to send and receive data. Data Terminal Equipment.
  • Page 75 Glossary 3 Integrated CRT terminal A terminal with a monitor and connections on the back for a keyboard and mouse. Interface A shared boundary defined by common physical interconnection characteristics, signal characteristics, and meaning of interchanged signals. Internet The Internet is a global web of interconnected computers and computer networks that are interconnected under a common set of network protocols that allows them to function as a single large network (see TCP/IP).
  • Page 76 Glossary 4 Packet A group of bits (including data and call control signals) transmitted as an identifiable unit on a packet-switched network (PSN). Password Authentication Protocol. An authentication scheme used by PPP servers to validate the identity of the originator of the connection. PAP applies a two-way handshaking procedure.
  • Page 77 Glossary 5 RS-232 cable A cable for serial interfaces between the terminal and communications devices, such as a modem. The cable connects to the 25-pin serial port at the back of the terminal. Maximum cable length is 50 feet; maximum signaling rate is 20 Kbits/sec.
  • Page 78 Glossary 6 Thin-client A low-cost computing device that works in a server-centric computing model. Thin clients typically do not require state-of-the-art, powerful processors and large amounts of RAM and ROM because they access applications from a central server or network. Thin clients can operate in a Server-based Computing environment.
  • Page 79 WINS server to maintain a complete database of entries through replication. Winterm Trademarked logo for Windows-based terminals manufactured by Wyse Technology Inc. X-ON/X-OFF Transmitter On/Transmitter Off. Control characters used for flow control, instructing serial devices to start transmission (X-ON) and stop transmission (X-OFF).
  • Page 80 Glossary 8 This page intentionally blank.
  • Page 81 Index 1 Index Functions Character Repeat 41 Connect 44 Desktop Area and Refresh Frequency 27 Numerics Enable Energy Savers 29 End 44 100Base-T 14 Keyboard 40 10Base-T 14 Logoff 45 Repeat Delay 41 Repeat Rate 41 Reset the Terminal to Factory Default Property Access Levels 18 Settings 22 ADJUST 33...
  • Page 82 Index 2 Terminal models integrated-display Parallel port 14 3630LE 1 PCMCIA 14 3720SE 1 PIN 34 3730LE 1 Properties sheets modular Configure 43 3200LE 1 Connections 43 3230LE 1 Display 25 3320SE 1 General 17 3350SE 1 Input 39 3360SE 1 SysInfo 17 Terminal Properties 18 Touch screen 14...
  • Page 83 Index 3 This page intentionally blank.
  • Page 84 Issue: 070601 Written and published by: Wyse Technology Inc., July 2001 ® ® Created using FrameMaker , Acrobat , and Magellan™ The on-line book is provided in both PDF and HTML versions, presented on both CD-ROM and the Wyse Web site.

This manual is also suitable for:

3360se3350se3320 se3200le3230le3630le ... Show all

Table of Contents