Key Codes - Wyse WY-99GT User Manual

Table of Contents

A-2

Appendb<

Introduction

ASCII Key Codes

WY-99GT User's Guide

Key Codes

This appendix lists the key codes for the terminal's ASCII and

ANSI personalities.

Tables B-1 through B-3 list ASCII codes for each of the three

keyboards available for the terminal. Codes are given for editing

and special keys only. Alphanumeric keys send the standard

ASCII codes (see Wyse Works ASCII Table).

Table B-4 summarizes the hexadeeimal values of the scan codes

sent by the keys on all keyboards when the terminal is in the PC

Term personality: each key sends one scan code when pressed

(the

down

code) and another code when released (the

code)

•

The table gives the codes for the editing and special keys only.

•

Scan codes for the alphanumeric and function keys are shown

on the VT220- and Enhanced PC-style keyboard illustrations.

Only the down codes are shown-the high bit is set when the

key is released. (The same codes are sent by the alphanumeric

and function keys on the other keyboards when the terminal is

in the PC Term personality.)

Table B-5 lists function key default codes for all keyboards and

all ASCII personalities except PC Term.

Table of Contents