Wyse WY-99GT User Manual page 16

2-8
Table 2-5 Continued
WY-99GT User's Guide
Parameter
AUX DATA/STOP
BITS
8/1
7/2
8/2
711
AUX PARITY
2
NONE
ODD
MARK
EVEN
SPACE
AUX DRCV
HNDSHAKE
DTR
BOTH
NONE
XON/XOFF
AUXXMT
HNDSHAKE
NONE
XON/XOFF
DSR
BOTH
DAT A/PRINTER
MODEM/AUX
AUX/MODEM
MDM DATA/STOP
BITS
8/1
712
8/2
711
MDM PARITY
3
NONE
ODD
MARK
EVEN
SPACE
Explanation
Through the AUX port, the terminal sends and
receives
8-bit data with one stop bit
7-bit data with two stop bits
8-bit data with two stop bits
7-bit data with one stop bit
The terminal sends data to the AUX port with
No parity bit
Odd parity
A high (mark) parity bit
Even parity
A low (space) parity bit
The terminal controls the receipt of data from a device
connected to the AUX port by
DTR handshaking (raising and lowering the DTR
line ·voltage)
Both X-on/X-off and DTR handshaking
No handshaking protocol
X-on/X-off handshaking
When sending data to a device connected to the AUX
port, the terminal
Ignores all incoming software handshaking signals
Responds to X-on/X-off handshaking
DSR handshaking
Both X-on/X-off and DSR handshaking
The terminal communicates with the computer through
The MODEM port (AUX port is printer port)
The AUX port (MODEM port is printer port)
Through the MODEM port, the terminal sends and
receives
8-bit data with one stop bit
7-bit data with two stop bits
8-bit data with two stop bits
7-bit data with one stop bit
The terminal sends data to the MODEM port with
No parity bit
Odd parity
A high (mark) parity bit
Even parity
Space parity
2. The terminal ignores any incoming parity bits.
3. The terminal ignores any incoming parity bits in ASCII modes.