Wyse WY-99GT User Manual page 23

Memory Space
WY-99GT User's Guide
In ASCII modes, the answerback message is sent when
o The terminal receives an,ASCII ENQ code (CTRL E),
o The ANSWERBACK mode parameter (Table 2-2) is set to
ON,
o And the SEND ACK parameter (Table 2-3) is set to ON
In ANSI modes, the answerback message is sent when
o The terminal receives an ASCII ENQ code (CTRL E)
o Or
[9[], I
Shift
I.
and
I
Break
I
are pressed
In ANSI modes, if the ANSWERBACK MODE parameter is ON,
then auto-answerback is enabled. The terminal sends the
answerback message when
o It is powered on,
o Or for a disconnect/reconnect
If the ANSWERBACK CONCEAL parameter (Table 2-2) is set
to
on,
the word CONCEALED displays in place of the message.
The message can't be displayed again until you redefine- it.
To save key definitions in nonvolatile memory, choose the SAVE
ALL option to exit setup mode. Key definitions share a total of
approximately 350 bytes of nonvolatile memory space with the
answerback message and function key labels.
If
you enter more
than 64 characters for any one key or reach the 350-character
overall limit, you'll hear a warning beep and won't be able to
enter more characters.
D
Note If you connect another keyboard to the terminal after
you've saved key definitions in nonvolatile memory, clear the
definitions to their default values.
2-15