Table of Contents
Advertisement
2.0 INSTALLATION
2.1
UNPACKING THE TERMINAL
The WY-50 is shipped in a special container that protects it from
shipping damage (see Figure 2-1).
Instruction documents are
packed in the same container.
To remove the terminal, set the container on a convenient flat
surface; cut the tape holding the top of the box closed and fold
back the lid.
Place your hand across the exposed styrofoam
supports for the terminal and simultaneously turn the box upside.
down.
The box can now be lifted off the terminal.
Next, rotate
the terminal so it is laying on its side.
This allows one of the
styrofoam inserts to be removed.
Then the keyboard can be
removed.
Rotate the terminal again so it is setting on its
pedestal.
The other styrofoam insert can now be removed.
The
power cord is packed in one of the external cavities of the
styrofoam inserts.
STYROFOAM INSERTS
POWER CORD
WYSE
I
I
I
I
Figure 2-1.
SHIPPING CONTAINER
2-1
Advertisement
Table of Contents
