Wyse WY-99GT User Manual page 49

WY-99GT User's Guide
A-15
Table B-10 Function Key Keyboard Style
Default Codes1
Key
VT220
2
ASCII Enhanced PC
Fl (HOLD SCREEN) Local ESC ( ? 5 i3 PF1
4
SHIFT Fl Local ESC ( 5 i
5
PFl
F2 (PRINT SCREEN) Local ESC [ ? 3 i PF2
SHIFT F2 Local ESC [ ? 1 i PF2
F3 (SETUP/RESET) Local ESC [ 2 i
PF3
SHIFT F3 Local ESC [ O i PF3
F4 (BLOCK/SEND) Local
ESC [@
PF4
SHIFT F4 Local ESC ( L PF4
F5 (BREAK) Local ESC ( M Same
SHIFT F5 Local ESC [ K Same
F6 ESC [ 17 - Same Same
SHIFT F6 None ESC [ 31 - Same
F7
ESC [ 18 -
Same Same
SHIFT F7
None ESC [ 32 - Same
F8 ESC [ 19 - Same
Same
SHIFT F8 None ESC [ 33 - Same
F9 ESC ( 20 - Same Same
SHIFT F9 None ESC [ 34 - Same
FlO ESC [ 21 -
Same Same
SHIFT FlO None
ESC [ 35 - Same
Fl l (ESC)
8
ESC [ 23 - Same
Same
SHIFT Fll None ESC [ 1 - Same
Fl2 (BS)7 ESC [ 24 - Same Same
SHIFT Fl2
None ESC [ 2 - Same
Fl3 (LF)
9
ESC [ 25 - Same
SHIFT F13 None ESC [ 3 -
Fl4 (HOME)B ESC [ 26 - Same
SHIFT Fl4 None ESC [ 4 -
1. These default codes apply only before the function keys are redefined or after any
redefinition has been cleared.
2. On the VT220-style keyboard, Fl through FS have local functions-see Table B-10.
3. With auxiliary print mode off. Sends ESC [? 4 i if auxiliary print mode is on.
4. On the Enhanced PC-style keyboard, function keys Fl through F4, shifted and
unshifted, send PF key codes (see Table B-8).
5. With transparent print mode off. Sends ESC [ 4 i if transparent print mode is on.
6. In VT52 and VTlOO modes, the default is ESC (CTRL I).
7. In VT52 and VTlOO modes, the default is BS (CTRL H).
8. In VT52 and VTlOO modes, the default is LF (CTRL J).
9. In VT52 mode, the default is ESCH. In VTlOO mode, the default is ESC [ H.