Key Codes - Wyse WY-60 User Manual

Appendix
D Key Codes
B-1
Introduction
This appendix lists the key codes for the terminal's ASCII personalities. (Key
codes for ANSI personalities are in the separate document, WY-60 ANSI
Personalities.
Tables B-1 through B-4 list ASCII codes for each of the four keyboards
available for the terminal.
• The tables include codes for all personalities except PC Term, in which the
keys send scan codes, not ASCII characters.
• Codes are given for editing and special keys only. Alphanumeric keys
send the standard ASCII codes (see Wyse Works ASCII Table).
Table B-5 summarizes the hexadecimal values of the scan codes sent by the keys
on all keyboards when the terminal is in the PC Term personality—each key
sends one scan code when pressed (the down code) and another code when
released (the up code).
• The table gives the codes for the editing and special keys only.
• Scan codes for the alphanumeric and function keys are shown on the
AT-Style and Enhanced PC-Style keyboard illustrations. Only the down
codes are shown—the high bit is set when the key is released. (The same
codes are sent by the alphanumeric and function keys on the other keyboards
when the terminal is in the PC Term personality.)
Table B-6 lists function key default codes for all keyboards and all ASCII
personalities except PC Term.