CONNECTIONS
7. Connect the speakers using the speaker cords.
Connect the *' +' terminals on the amplifier to the '' +'' terminals
on the speakers, and the '' — '' terminals on the amplifier to the "'—
terminals on the speakers.
®
-
@ Push the speaker terminal knob down.
@ Insert the speaker cord.
@) Push the knob up.
O1 to
NOTE:
Do not allow the conductors of the cords to project beyond the terminals
and to come into contact with other conductors.
A breakdown or failure
may occur when conductors touch one another.
Speaker impedance
Connect speaker systems with a nominal impedance of between 8 and
16 Q.
8. Connect the CD player's power cord to the amplifier's AC OUTLET.
9. Finally, connect the power cord (1) to the AC wall socket (2.
12
<(ARE1181 >
En/Fr
CONNEXIONS
7. Connecter les enceintes 4 I'aide des cordons d'enceintes.
Raccorder les bornes *' +' de l'amplificateur aux bornes '' + '' des
enceintes et les bornes "'—"' de l'amplificateur aux bornes ''—'' des
enceintes.
as
@) Abaisser le bouton de la borne d'enceinte.
@ Insérer le cordon d'enceinte.
@) Remonter le bouton.
o} to
REMARQUE:
Ne pas laisser les conducteurs des cordons sortir des bornes et entrer
en contact avec d'autres conducteurs. Une panne ou un claquage peut
se produire lorsque des conducteurs se touchent.
Impédance des enceintes
Connecter des systémes d'enceintes ayant une impédance nominale
de 8 a 16 ohms.
8. Connecter le cordon d'alimentation du lecteur de disque compact
a la prise AC OUTLET de !'amplificateur.
9. Brancher, finalernent, le cordon d'alimentation (1) a la prise secteur
murale (2.