Table of Contents
Advertisement
Screen displays
The internal drive and external drive information
(DRIVE INFORMATION) is displayed at the bottom of
the menu.
It enables the operator to check whether
disc copying can be executed.
Setting item (screen display)
Description of function
Internal drive status display
(INTERNAL DRIVE)
Copy source disc type display
Display of number of frames
already recorded/remaining
number of frames on copy source
disc .
External drive status display
(EXTERNAL DRIVE)
Copy destination disc type display
Display of number of frames
already recorded/remaining
number of frames on copy
destination disc
This indicates the status of the unit's internal drive (disc). One of the following items corresponding
to this status appears.
OK:
Copy enable status
NO DISC:
No disc is inside the unit.
UNFORMAT DISC: The disc has not been formatted.
UNKNOWN DISC:
Unknown disc
This indicates the recording format of the disc.
TYPE <COMPONENT>:
The disc now in use has been formatted by the component recording format.
TYPE «RGB»:
The disc now in use has been formatted by the RGB recording format.
This indicates the number of frames already recorded and the remaining number of frames on the
disc.
USED:
This indicates the number of frames already recorded.
REMAINS: This indicates the remaining number of frames.
This indicates the status of the external drive (disc). One of the following items corresponding to this
status appears.
NO CHECK:
The external drive has not yet been checked.
It must be checked if frames or a
disc is to be copied.
Copy enable status (the opening and closing of the external drive's tray are
inhibited).
NO DISC:
No disc is inside the external drive.
UNFORMAT DISC: The disc has not been formatted.
WRITE PROTECT: The write protect switch on the disc has been set to the write-protect position.
UNKNOWN DISC:
Unknown disc
This indicates the recording format of the disc.
TYPE <COMPONENT>:
The disc now in use has been formatted by the component recording format.
TYPE <RGB>:
The disc now in use has been formatted by the RGB recording format.
COPY DISABLE:
Since the recording format of the destination disc does not match that of the source disc, recording
is not possible.
OK TRAY-LOCK:
This indicates the number of disc frames already recorded and the remaining number of frames.
USED:
This indicates the number of frames already recorded.
REMAINS: This indicates the remaining number of frames.
64
Advertisement
Table of Contents
