Table of Contents
Advertisement
Screen displays
7) PROGRAM
sub menu
< PROGRAM >
The program
playback seguence
(100 steps per
program) is set using the sub menu.
2
>
Only one program can be retained inside the unit but
< LOAD >
up to 20 programs can be written on a disc.
< SAVE >
< CLEAR >
SELECT
<d PA V>
EXIT <MENU>/ SAVE <SET>
Setting item (screen display)
Program input
(PROGRAM-INPUT)
Selectable modes
Description of function
Fransfer to the
This is for inputting programs.
program input
When the SET button is pressed, the program input setting screen appears.
setting screen.
(See the next section 7-1 for details of the program input screen.)
This is for loading the program data, which has been written on the disc, into the
unit.
When the SET button is pressed, 20 programs on the disc are displayed.
Select one of the programs, and load it by pressing the SET button.
Program data loading
(LOAD)
This is for saving the program data inside the unit onto a disc.
When the SET button is pressed, write areas equivalent to 20 programs on the
disc are displayed.
Select one of the write areas, and save the data pressing the SET button.
Program data initializing
This is for initializing the program data inside the unit.
(CLEAR)
Program data saving
(SAVE)
52
Advertisement
Table of Contents
