Table of Contents
Advertisement
Screen displays
8-1) RS-232C setting screen
The communication parameters relating to RS-232C
RS232C
SETUP
BIT-LENGTH
STOP-BIT
PARITY
BAUD-RATE
SELECT
<a> AV.
EXIT <MENU> / SAVE <SET>
Setting item (screen display)
| Selectable modes
Description of function
Bit length setting
8 BIT
This is used to select the character length.
(BIT-LENGTH)
8BIT: 83-bit characters are used.
7BIT: 7-bit characters are used.
This is used to select 1 bit or 2 bits as the stop bit.
1BIT: The stop bit is set to 1 bit for use.
2BIT: The stop bit is set to 2 bits for use.
Stop bit setting
(STOP-BIT)
Parity setting
This is used to select the parity.
(PARITY)
NONE: No parity
EVEN: Even parity
ODD:
Odd parity
This is used to select the RS-232C interface transfer rate.
4800: A transfer rate of 4800 baud is used.
9600:
A transfer rate of 9600 baud is used.
19200: A transfer rate of 19200 baud is used.
Transfer rate setting
(BAUD-RATE)
The underlining denotes the default (factory) setting.
56
Advertisement
Table of Contents
