Table of Contents
Advertisement
Operation
3. Multi-screen playback
Multi-screen playback is a function which divides up
the screen into sections so that a multiple number of
frames are displayed. The multi-screen facility is also
used to check search results: refer to the next section
on searches for details on the multi-screen displays
when searches are performed.
3-1. Preparations
Set the number
of multi-screen
divisions
on
the
SYSTEM setup menu.
< SYSTEM >
BEEP
ON
16
EJECT-KEY —
>
L
DATE
:
99/1/1
TIME
12:00
<RS232C>
<GPFl>
<VIDEO-CONTROL>
REM
SELECT
<4PaY¥>
EXIT <MENU> / SAVE <SET>
MULTI-SCREEN:
Select whether the full screen is to be divided into
4,9 or 16 multi screens.
res
Full screen
Full screen
Full screen
divided into 4
divided into 9
divided into 16
multi screens
multi screens
multi screens
33
3-2. Multi-screen playback in address
seguence (except when program
playback is set)
1. The multi-screen display appears when the MULTI
button is pressed.
The MULTI lamp lights, and the multi-screens are
created. The multi-screen creating seguence can
be aborted at any time by pressing the CLR button.
The multi-screens are created in seguence starting
from the top left and ending with the bottom right of
the screen. The frame appearing first is the frame
being played (or the frame with the address played
previously if the unit was not set to the playback
mode when the MULTI button was pressed), and
subseguent frames are displayed in ascending
order of their addresses. Pages can be scrolled
using the "+" and "—" buttons. By pressing the "+"
button, the pages can be advanced toward higher-
numbered addresses; conversely, by pressing the
"— button, they can be reversed toward lower-
numbered addresses.
When the "-" button has
been pressed, multi-screens are created starting
from the bottom right and ending with the top left of
the screen in descending order of their addresses.
<Note>
When multi-screen playback is performed for the first
time from the INPUT mode after the power was turned
on, playback commences
at the frame which was
recorded last on the disc.
If multi-screen playback is
then performed from the INPUT or FREEZE MODE,
playback commences at the frame with the address
which was played previously.
2. Check the frame.
A frame displayed on the multi-screens can be
selected and displayed on the full screen.
Move
the selection frame (blue frame) displayed on the
multi-screen using the up, down, left and right arrow
buttons to the target frame, and press the SET
button. The target frame will now appear on the full
screen.
Press any button to return to the multi-screen
display.
Advertisement
Table of Contents
