Panasonic LQ-D100P Operating Instructions Manual page 37

Operation
4. Check the search results, and then select the
frames.
To check the search results, use the cursor (») to
select the frame or group to be checked, and then
initiate multi-screen playback or full-screen
playback.
O How to play back the search results
1) Initiating multi-screen playback for the frames
displayed on each line
If the MULTI button is pressed when the "»"
cursor at the left of the screen is highlighted, the
frames found as a result of the search and
displayed on the lines are played back on multi-
screens.
With the frames displayed in groups, the frame
with the first address in the group is shown on
the multi-screen display as representative of that
group.
< SEARCH RESULT LIST >
98/10/10
ABCDEFG 98/11/01
123 98/11/02
AAA123 98/11/02
AAA124 98/11/02
AAA125 98/11/04
PANASONIC 98/11/24
LO-D100 98/11/26
SELECT RESULT and SET : PLAY
In the example of the screen shown above, multi-
screen playback is initiated for the single frames
of "ABC" and "ABCDEFG", and the first frame of
"123" group in this order, followed by the single
frames of "AAA123," "AAA124" and "AAA125",
and the first frames of the "Panasonic" and so
on.
Select the frame to be viewed from the multi-
screen display, and press the SET button to play
it back on the full screen.
2) Playing back the frames in a group on the multi-
screen display
Use the up or down arrow button to align the
cursor with the line where a group of frames is
indicated in the ADDRESS column. When the
right arrow button is now pressed, the ADDRESS
column is highlighted. The right arrow button will
not work on a line where a group is not indicated.
When the MULTI button is pressed in this state,
the frames in the group concerned appear on the
multi-screen display.
< SEARCH RESULT LIST >
98/10/10
ABCDEFG 98/11/01
123 98/11/02
AAA123 98/11/02
AAA124 98/11/02
AAA125 98/11/04
PANASONIC 98/11/24
LO-D100 98/11/26
SELECT RESULT and SET : PLAY
In the case of the example above, the frames in
the group with the "PANASONIC" ID appear on
the multi-screen display
Select the frame to be viewed from the multi-
screen display, and press the SET button to play
it back on the full screen.
3) Playing back frames not in a group on the full-
screen display
Move the cursor up or down to select the frame
which is not in a group, and press the SET
button to play it back on the full screen.
. Terminate the search.
When the search is terminated, the frames which
were searched and selected are played back. The
"selected frame" is a frame which is played back on
the full screen when the SET button is pressed on
the search result screen.
When multi-screen playback is being performed,
the search is terminated by pressing the MULTI
button, in all other cases, it is terminated by
pressing the SEARCH button. The screen
transition is as shown below.
SET
Search | button (Search
input i result
SEARCH | screen screen | MULTI
button
button