Table of Contents
Advertisement
Operation
. End program playback.
If OFF has been selected as the REPEAT setting,
program playback ends when all the programs have
been played back.
If ON has been selected as the REPEAT setting or
if a program
is to be ended at an interim point,
press the CLR button.
Cautions:
1: When the playback time interval is set to O sec.
during program playback (PROGRAM PLAY), one
of the programs will be played in the sequence in
which the programs were recorded each time the
FORWARD button is pressed.
. The playback time interval can be set starting at 1
second during automatic playback (AUTO PLAY).
. Although the recording time interval can be set
starting at 1 second, the correct time interval
cannot be maintained if the setting is shorter than
the time
required
for the playback
operation.
Normally, at least 2 seconds are required for the
playback operation.
A setting of 4 or more
seconds
is therefore
recommended
as
the
playback time interval.
.When
ON
has
been
selected
as the VOICE
setting,
a minimum
setting time duration of 9
seconds is required. If this duration is set shorter
than this, the voice memo will not be played back
in its entirety.
32
Advertisement
Table of Contents
