Table of Contents
Advertisement
Operation
4) The characters input for ID, NAME or NAME? are
used to search not only for frames which meet all
the conditions
perfectly but also frames which
contain those characters.
l
Parts of a DATE
or TIME
can be input as a
condition.
The trames matching whatever part of
the date or time has been input will be searched.
@98:--:--
The frames recorded in 1998 will be searched.
@ 98:10:--
The frames recorded in October 1998 will be
searched.
e 98:10:10
The frames recorded on October 10, 1998 will be
searched.
5) If no conditions are input, all the frames will be
displayed.
3. Conduct the search.
When
the
SET
button
is pressed
after the
conditions have been input, the search is started.
1) When a search is conducted for the first time
from the INPUT mode after the power was
turned on, the frame recorded last on the disc
will serve as the starting point.
2) When a search is conducted while playback is
underway,
the frame being played back will
serve as the starting point, and the search will be
conducted in the forward direction.
3) When a
search is conducted in the INPUT Or
FREEZE
mode,
the frame with the address
which was played back previously will serve as
the starting point, and the search
will be
conducted in the forward direction.
The search progress made is displayed during a
search. When a 1-time search (up to 256 lines) is
completed or when a search is aborted using the
CLR button, the search results are displayed. To
continue with the search, press the "+" button or "—"
button. This enables a search following on from the
current search results.
|
If no frame matching the conditions has been found
as
a result of the search,
"NOT
FOUND"
is
displayed. Press any button to return to the search
input screen.
36
O How to read the search result screen
< SEARCH
RESULT LIST >
98/10/10
98/11/01
98/11/02
98/11/02
98/11/02
98/11/04
98/11/24
98/11/26
ABCDEFG
123
AAA123
AAA124
AAA125
PANASONIC
LQ-D100
SELECT
RESULT
and SET: PLAY
The search results are displayed as shown in the
example presented above.
As shown above, in some cases 3 items such as ID
(NAME or NAME2), DATE and ADDRESS or 4 items
such as ID (NAME or NAME2),
DATE, TIME and
ADDRESS are displayed.
A 4-item display appears
when
DATE
and TIME
have
both
been
input as
search conditions.
ln the search results, the frames which can be
ģrouped together due to have the same ID or date,
etc. are displayed in groups.
Whether a particular line represents one frame or a
group of frames is indicated in the ADDRESS column.
In the ADDRESS column:
1) A line with a number display only in the address
column denotes a single frame, and the number
refers to the address of the frame.
In example @ above, the frame with the "ABC" ID
and with a recording date of 98/10/10 is found at
address 3.
2) A number preceded by an asterisk and colon (x :)
denotes a group, and the number which follows the
colon indicates the number of frames in the group.
This number does not indicate an address.
In example
@ above, there are 124 consecutive
frames with the PANASONIC" ID.
Advertisement
Table of Contents
