Table of Contents
Advertisement
Adjusting the outside mirrors
Use button
2
or
4
to select the desired mir-
#
ror.
%
In vehicles with MBUX Interior Assistant and
driver camera, the required outside mirror can
also be preselected automatically via a natural
head movement to the left or
right(
page 290).
/
Use button
1
to adjust the position of the
#
selected mirror.
Folding the outside mirrors in/out (vehicles with
electrically folding outside mirrors)
Briefly press button 3.
#
%
If the battery has been disconnected or has
discharged, the outside mirrors must be
moved briefly using button 3. Only then will
the automatic mirror folding function work
properly.
Engaging the outside mirrors
If an outside mirror has been forcibly disengaged,
proceed as follows.
Vehicles without electrically folding outside
#
mirrors: move the outside mirror into the cor-
rect position manually, until it engages audibly.
Vehicles with electrically folding outside mir-
#
rors: press and hold button 3.
You will hear a click and the mirror will audibly
engage. The outside mirror will now be set to
the correct position.
Light and visibility 153
Automatic anti-glare mirrors function
& WARNING Risk of acid burns and poison-
ing due to the anti-glare mirror electrolyte
Electrolyte may escape if the glass in an auto-
matic anti-glare mirror breaks.
The electrolyte is hazardous to health and cau-
ses irritation. It must not come into contact
with your skin, eyes, respiratory organs or
clothing or be swallowed.
If you come into contact with electrolyte,
#
observe the following:
Immediately rinse the electrolyte
R
from your skin with water and seek
medical attention.
If electrolyte comes into contact with
R
your eyes, immediately rinse them
thoroughly with clean water and seek
medical attention.
If the electrolyte is swallowed, imme-
R
diately rinse your mouth out thor-
oughly. Do not induce vomiting. Seek
medical attention immediately.
Advertisement
Table of Contents
