Table of Contents
Advertisement
Always engage seat belt tongue
1
#
belt into seat belt buckle
2
of the corre-
sponding seat.
To adjust the seat belt height: press button
#
on the seat belt outlet and slide the seat belt
outlet to the desired position.
To engage the seat belt outlet: release button
#
3
and ensure that the seat belt outlet
engages.
* NOTE Deployment of components of the
restraint system when the front passenger
seat is unoccupied and a seat belt is
buckled
When the front passenger seat is unoccupied
and the seat belt tongue of the seat belt is
engaged in the seat belt buckle, components
of the restraint system may deploy unnecessa-
rily on the front passenger side, e.g. the Emer-
gency Tensioning Device.
Only buckle the seat belts as intended.
#
%
Observe the information on child seat safety
feature of the seat belt (
of the seat
Function of the restraint system warning lamp
When the vehicle is switched on, a self-test is per-
formed, during which the restraint system warning
3
lamp 6 lights up. It goes out no later than a
few seconds after the vehicle is started. The com-
ponents of the restraint system are then func-
tional.
Occupant safety – Brief overview of the most important points
A malfunction has occurred in the restraint sys-
tem if:
the restraint system warning lamp 6 does
R
not light up or lights up continuously when the
vehicle is switched on.
the restraint system warning lamp 6 lights
R
up continuously or repeatedly during a jour-
ney.
If components of the restraint system have been
deployed, the restraint system warning lamp 6
will light up continuously.
& WARNING Risk of injury due to malfunc-
page 67).
/
tions in the restraint system
Components in the restraint system may be
activated unintentionally or not deploy as plan-
ned in an accident.
Have the restraint system checked and
#
repaired immediately at a qualified spe-
cialist workshop.
Mercedes-Benz recommends that you have the
vehicle towed to a qualified specialist workshop.
45
Advertisement
Table of Contents
