Table of Contents
Advertisement
Setting the temperature
To increase the temperature: press q or
#
move the controller. To set the temperature to
the maximum, press and hold q.
To reduce the temperature: press ± or move
#
the controller. To switch off the climate con-
trol, press and hold ±.
%
The temperatures for the driver's and front
passenger sides can be operated only one
after the other.
Setting the airflow
Press J on the climate bar on the central
#
display.
To increase the airflow: press q or move the
#
controller. To set the airflow to the maximum,
press and hold q.
To reduce the airflow: press ± or move the
#
controller. To switch off the airflow, press and
hold ±.
%
If the AUTO function is activated, the airflow
will remain active.
Activating/deactivating the A/C function via the
climate bar
The A/C function heats, cools and dehumidifies
the vehicle's interior air.
Press ¿ on the climate bar on the central
#
display.
%
The ¿ button on the climate bar on the
central display can also be assigned to other
functions. If the button is not shown on the
climate bar, the A/C function can be switched
on and off via the climate menu.
%
Switch off the A/C function only briefly; oth-
erwise, the windows may fog up more quickly.
Condensation may drip from the underside of
the vehicle when cooling mode is active. This
is not indicative of a malfunction.
Calling up the air conditioning menu using the cli-
mate bar
The air conditioning menu can be called up via the
climate bar. The climate bar is always shown on
the lower edge of the central display.
Climate control 159
Select the
Menu
entry in the climate bar.
#
The
First Row of Seats
menu is opened.
Jumping directly to the
Air Quality
menu
Select the G fine particle sensor status
#
display in the air conditioning bar.
The
Air Quality
menu is opened. An animation
of the automatic air cleaning taking place is
shown.
%
The fine particle sensor status display is on
the home screen next to the temperature dis-
play on the right and it informs you of the cur-
rent particulate levels inside and outside of
the vehicle.
The measurement values are shown with the
3
µg/m
units (micrograms per cubic meter).
Strong acceleration after longer parking periods
will lead to a detachment of the dust covering the
vehicle. This dust measured by the PM2.5 sensor
might lead to a short rise of outside values.
Advertisement
Table of Contents
