Table of Contents
Advertisement
4
Deleting parameters
5
Adding new parameters
%
The following values can be set for the param-
eters, for example:
Speed
R
Longitudinal/lateral acceleration
R
Steering angle
R
Engine speed
R
Engine oil/tire temperature
R
Based on the analysis, you can check and opti-
mize driving characteristics for any position on
the track.
Exporting tracks (USB)
Select õ
Tracks
.
#
An overview of all stored tracks will appear.
Select the desired track.
#
Select options u for the desired track.
#
Select
Export Track
to....
#
The selected track can be exported to a USB
storage device connected to the vehicle.
Editing tracks and recordings
Select õ
Tracks
.
#
Select the desired track.
#
Select options u for the desired track.
#
Select
Rename
or Delete.
#
or
Select a track.
#
Highlight the desired recording.
#
Select u Options.
#
Select
Export to...
or Delete.
#
Setting Drag Race
Multimedia system:
TRACK PACE
Drag Race
4
5
Measuring acceleration
Select Z
Drag race
options.
#
Select Acceleration.
#
Set a starting speed or select Automatic.
#
Measurement will begin as soon as the speci-
fied starting speed has been reached.
MBUX multimedia system 303
Set a target speed.
#
Measurement will stop as soon as the speci-
fied target speed has been reached.
Start off and begin the measurement.
#
Measurement will begin when the vehicle
accelerates.
Measurement can be stopped early by interrupt-
ing the acceleration procedure.
Quarter mile race
Select Z
Drag race
options.
#
Select
Quarter
Mile.
#
Set a target distance.
#
Measurement will stop as soon as the speci-
fied target distance has been reached.
Start off and begin the measurement.
#
Measurement will begin when the vehicle
accelerates. Timing will run until the target
distance or a maximum of one mile has been
traveled.
Measurement can be stopped early by interrupt-
ing the acceleration procedure.
Advertisement
Table of Contents
