Installing And Using The Network Scanner - Xerox WorkCentre M24 System Administrator Manual

Installing/Using the Network Scanner

Installing and Using the Network Scanner

Utility
To retrieve scanned documents directly from the Printer's mailbox(es) into an image-editing application such
as Adobe® Photoshop®, you need to install the Network Scanner Utility (scan driver) on your workstation.
By installing the Network Scanner Utility on your workstation, you can additionally use an application known as
Mailbox Viewer to view and import scanned files.
Before Installing the Network Scanner Utility
Before installing the Network Scanner Utility, make sure that your workstation meets the following
requirements:
You must be running Windows 95, 98, Me, NT4, 2000, or XP. Windows NT 4.0 Server TSE (Terminal
Server Edition) and Windows 2000 Server/Advanced Server Terminal Service are NOT compatible with
this feature.
Your workstation must be operating with a i486DX4/100 MHz processor or faster, have 32 MB RAM or
greater, and have 40 MB or more of free hard drive space (not including space for storing scanned
data).
Your workstation must be connected to a network using the TCP/IP protocol.
Your image-editing application must be compatible with the TWAIN interface to import scanned data.
Installing the Network Scanner Utility
1.
Insert the Driver/Network Utility (Windows) CD ROM into your workstation's ROM drive.
2.
Open Windows Explorer (NOT Internet Explorer), click the drive letter for your CD ROM drive, and open
Drivers\Scan\Disk1.
3.
Double click Setup.exe and follow the instructions displayed on screen.
Uninstalling the Network Scanner Utility
1.
In Windows 95, 98, and Me, double click My Computer, Control Panel, then Add/Remove Programs.
From the Windows 2000 desktop, from the Start menu, select Settings, Control Panel, then double click
Add/Remove programs. On the Windows XP desktop, click Start, Control Panel, then double click
Add or Remove Programs.
2.
Select Fuji Xerox Network Scanner Utility, then click Add Remove.
3.
Click Yes.
Importing Scanned Data from the Mailbox to an Image-Editing Application
1.
Start a TWAIN-compatible application program, such as Photoshop.
2.
From the File menu, select the command for selecting the scan source (Import/Twain Source, in
Photoshop).
3.
Select WorkCentre M24 from the displayed list and click OK.
E16