Xerox WorkCentre M24 System Administrator Manual page 47

5a Install
Step 5
You must select the connectivity protocol for the network
...continued
environment in which you will be working before you can
proceed with your installation. Select your connectivity
NOS Selection
protocol from the following list:
Menu
TCP/IP (Protocol Configuration) — already performed in
Step 4
TCP/IP (LPD Enablement)
TCP/IP (Dynamic Addressing)
TCP/IP (Port 9100)
Microsoft (NetBEUI)
Microsoft (NetBIOS over IP)
NetWare 4.x, 5.x (NDS)
NetWare 3.x (Bindery)
IPP (Internet Printing Protocol)
EtherTalk (AppleTalk)