Xerox WorkCentre M24 System Administrator Manual page 77

6a6 - NetBIOS over IP Client/Server Printing
Add... button and select Client Service for NetWare. With your Operating System Installer Disk readily
available, click the Have Disk... button and follow any remaining instructions.
Add the Printer to the Windows 2000 and XP Desktop
1.
On the Windows 2000 desktop, from the Start menu, select Settings, then Printers. On the Windows
XP desktop, from Start, select Printers and Faxes.
2.
On Windows 2000, double-click Add Printer. On Windows XP, from Printer Tasks, select Add a
printer.
3.
When the "Add Printer Wizard" displays, click Next.
4.
Select Network Printer and click Next.
5.
In Windows 2000, on the "Locate Your Printer" screen, select the radio button labeled "Type the printer
name or click next to browse for a printer." Click Next. In Windows XP, on the "Specify a Printer"
screen, select the radio button labeled "Connect to this printer (or to browse for a printer, select this
option and click Next)."
6.
When the "Browse for Printer" screen displays, wait for the screen to finish loading its list of Servers and
Print Queues. Note: Make sure that you are browsing the NetWare network and NOT the Microsoft
Windows Network.
7.
On the "Browse for Printer" screen, click on (select with your mouse) your Primary Server and Print
Queue. Click Next.
8.
When prompted for the driver files, select Have Disk and browse to the location of your print drivers.
9.
Select the .INF file then click Open.
10.
When the "Install from Disk" screen displays, verify that the path and file name are correct and click OK.
11.
Select the model that corresponds to your Printer and click Next.
12.
Enter a name for your Printer and select either Yes or No for making this printer your default Windows
printer. Select Yes if you will be printing primarily to this printer from your Windows applications. Click
Next.
13.
Select Yes to print a test page. Click Next.
14.
Click Finish.
Configure the Print Driver
1.
On the Windows 2000 desktop, from the Start menu, select Settings, then Printers. On the Windows
XP desktop, from Start, select Printers and Faxes.
2.
Right click on the Printer's icon and select Properties. Use the available Tabs to set the Printer's job
processing defaults. Additional settings may be accessed by clicking the Printing Preferences button
on the General Tab.
Select another Protocol Go on to Step 7