Supported Bootp/Dhcp Fields - Tektronix Phaser 740 Network Manual

7
TCP/IP Printer Configuration (All Platforms)
Supported BOOTP/DHCP fields
68 PhaserShare Networking Manual
The printer recognizes the BOOTP/DHCP fields listed in the following table.
Field Description
gw Gateway address list
ha Hardware address
ht Hardware type (see
Assigned Numbers RFC)
ip IP address
lg Log host address(es)
sm Subnet mask
dn IP domain name
ds DNS server IP address
list
Values
List of IP addresses separated by spaces.
Hexadecimal; the ha tag must be preceded by the
ht tag.
Unsigned decimal, octal, or hexadecimal integer,
or one of the following symbolic names:
For UNIX Ethernet:
ethernet or ether for 10-Mbit Ethernet
(DIX encapsulation);
ieee802 for IEEE 802 Ethernet
(SNAP encapsulation).
For UNIX Token Ring:
token ring
For OS/2 Ethernet or Token Ring:
ether
A single IP address.
A list of IP addresses separated by spaces.
A single IP address.
A single domain name.
Printer recognizes up to two IP addresses,
separated by spaces.