Tektronix Phaser 740 Network Manual page 90
Phasershare series b network interface
Hide thumbs
Also See for Phaser 740:
- Service manual (148 pages) ,
- Setup manual (82 pages) ,
- User manual (44 pages)
Table of Contents
Advertisement
7
TCP/IP Printer Configuration (All Platforms)
82
PhaserShare Networking Manual
Setting SNMP parameters using a PostScript utility file
To create a PostScript file to control these parameters, use the script config-SNMP
provided with the printer's network utilities software.
1.
Connect the printer to the network.
2.
Run the script config-SNMP:
a.
Change (cd) to the bin subdirectory in the directory where you placed
your printer's network utilities.
b.
Run the script, redirecting the output to a file. Type:
config-SNMP > filename
3.
When prompted, provide the information for the SNMP utility.
4.
Send the file named in Step 2b to the printer using lp or lpr.
Advertisement
Table of Contents
Troubleshooting
