Tektronix Phaser 740 Network Manual page 101

5.
Perform the appropriate step for your HP-UX version:
Version 9.x. Highlight Printers and Plotters from the menu. Press
Return or click Open.
Version 10.x. Double-click the Printers and Plotters icon.
6. Perform the appropriate step for your HP-UX version:
Version 9.x. Highlight Printers/Plotters from the menu. Press Return
or click Open.
Version 10.x. Again, double-click the Printers and Plotters icon.
7.
From the Actions menu, select Add Remote Printer/Plotter.
8.
Fill in the fields. See the following table for example entries
and descriptions. Access SAM's help utility for additional information
about these fields.
Field name
Printer Name
Remote System name
Remote Printer name
Remote cancel model
Remote status model
Printer class ( version 9.x )
Remote printer is on a
BSD system?
9.
To save your changes, click OK at the bottom of the window.
10.
When you are asked about sending a test file to the printer, type no. (It is
recommended that you do not let SAM send a test file because it may not
be compatible with your printer.)
11.
Exit SAM:
a.
From the File menu, select Exit.
b. Click Exit SAM.
TCP/IP Host Configuration (UNIX)
Example entry Description
phaser360PS The name you use to access the printer.
You can use any name you want.
tekphaser The name that you entered in your
/etc/hosts file as the remote
machine name.
PS Queue name that the printer recognizes:
PS for PostScript
PCL for text
HPGL for HP7475A
AUTO for automatic selection.
rcmodel -
rsmodel -
- Optional
- Check the box for a BSD system.
PhaserShare Networking Manual
8
93