Printing Usage Profile Reports From Phaserlink Printer Management Software; Sending Usage Profile Reports Via Email From The Front Panel - Tektronix Phaser 740 Network Manual

13
Printer Management
Printing Usage Profile reports from PhaserLink Printer
Management Software
Sending Usage Profile reports via email from the front panel
136 PhaserShare Networking Manual
Phaser 780 printer
1.
While Ready is displayed, press Select; the Printer menu is displayed:
Printer Menu
Help Pages
2.
Press Menu; the Help Pages menu is displayed:
Help Pages
Configuration Page
3.
Press the left or right arrow buttons until the front panel displays Usage
Profile:
Help Pages
Usage Profile
4.
Press Menu to access the Usage Profile menu.
5.
Press and hold the up arrow button; while holding the up arrow button,
quickly press Print. Release both buttons.
6.
To return the printer to normal operation, press Exit (the far right button)
until the front panel displays Ready.
1.
From the printer's home page, click Configuration; this displays the View
and Configure Settings page.
2.
On the View and Configure Settings page, select Usage Profile from the
Print pull-down list. Click Print.
N
O T E
To send Usage Profile reports via email, status notification (email notification) must
be properly set up for your printer. For more information, see "PhaserLink Status
Notification (Email Notification)" on page 132.
Phaser 840 printer
1.
When the front panel displays READY TO PRINT, press the down arrow
button until Menu is highlighted. Press Select.
2.
Press the down arrow button until Consumable Usage is highlighted.
Press Select.
3.
Press the down arrow button until Email Report or Email Job
Report is highlighted. Press Select.
Menu
Print
Menu