Tektronix Phaser 740 Network Manual page 153

Usage profile full report - some fields not supported by all printers (cont'd.)
Field
number Field name
162 Fuser Remaining (%) The percentage of life remaining in the fuser unit.
163 Imaging Unit
Remaining (%)
164 Transfer Kit
Remaining (%)
165 Fuser Roll
Remaining (%)
166 Main Charge Grid
Remaining
171 Doors Open
172 Consumables
Replaced
173 Paper Out
174 Button Presses
175 Feature
181 Power On Count
182 Total On Time (hrs)
183 Latest On Time (hrs)
184 EStar Time (hrs)
185 EStar Time
Distribution (mins)
186 Warmup Time (hrs)
187 Offline Time (hrs)
188 JetStack Standby
Time (hrs)
189 JetStack Standby
Time Distribution
(mins)
191 Temperature (C)
Description
The percentage of life remaining in the imaging unit.
The percentage of life remaining in the transfer kit unit.
The percentage of life remaining in the fuser roll unit.
The percentage of life remaining for the main charge
grid.
For each access door, the number of times it has been
opened.
A distribution of the conditions at which each
consumable has been replaced, whether it was low or
out or neither (i.e. at the user's discretion), or some
other condition detected by the printer.
For each tray, the number of times it has been emptied.
The number of times any of the front panel buttons has
been pressed.
A distribution of how many times the user has accessed
front panel menu settings or printed internal help pages.
The number of times the power has been switched on.
Total time the printer has been on, in hours.
Time the printer has been on since just the last time it
was switched on.
Total time the printer has been in Energy Star mode, in
hours.
A distribution of the time the printer has spent in Energy
Star mode. For example: 15-29:5 indicates that there
were 5 periods of Energy Star lasting between 15 and
29 minutes.
Total time the printer has been in the warmup state, in
hours.
Total time the printer has been unavailable for printing,
in hours.
Total time the printer has been in JetStack Standby
mode, in hours.
A distribution of the time the printer has spent in
JetStack Standby mode. For example: 15-29:5
indicates that there were 5 periods of JetStack Standby
lasting between 15 and 29 hours.
A distribution of hourly temperature readings.
For example: <=10:2 indicates that the engine
temperature was less than or equal to 10 degrees
Celsius for 2 hours.
PhaserShare Networking Manual
13
Printer Management
145