Unix (Linux); Quick Install Steps - Xerox Phaser 4500 Reference Manual

UNIX (Linux)

This topic includes:
■ "Quick Install Steps" on page 3-41
"Additional Resources" on page 3-42
■
Your printer supports connection to a variety of UNIX platforms through the parallel and
network interface. The workstations currently supported by CentreWare for UNIX/Linux to a
network-connected printer are:
Sun Solaris
■
■ IMB AIX
■ Hewlett-Packard HP-UX
■ DEC UNIX
■ Linux (i386)
■ Linux (PPC)
■ SGI IRIX
The following procedures enable you to connect your printer using any of the supported
versions of UNIX or Linux listed above.

Quick Install Steps

From the Printer
1.
Verify that both TCP/IP protocol and the proper connector are enabled.
2. At the printer's front panel, select one of these IP address options:
■ Allow the printer to set up a DHCP address.
Enter the IP address manually.
■
3.
Print the "Configuration Page" and keep it for reference. For information about printing
Configuration pages, go to
CD-ROM.
Copyright © 2004 Xerox Corporation. All Rights Reserved.
Reference/Features/Front Panel
3-41
Phaser™ 4500 Laser Printer
on the User Documentation