1. Manuals
  2. Brands
  3. Xerox Manuals
  4. Printer
  5. Phaser 4500
  6. Reference manual

Accessing Power Saver; Preventing Access To Front Panel Settings - Xerox Phaser 4500 Reference Manual

Xerox phaser 4500: reference guide
Hide thumbs Also See for Phaser 4500:
Table of Contents

Advertisement

Printing the Startup Page
To print the "Startup Page":
1.
Select Information, then press the OK button.
2.
Information
Select
3.
Startup
Page, then press the OK button to print.
Select

Accessing Power Saver

To save energy, the printer enters a Power Saver, low-energy consumption mode after a pre-
defined period of time since its last activity. In this mode, most printer electrical systems are
shut down. When a print job is sent to the printer, the printer enters Warmup Mode. You can
also warm up the printer by pressing the OK button on the front panel.
If you find that the printer is going into Power Saver mode too often and you do not want to
wait while the printer warms up, increase the length of time before the printer goes into Power
Saver mode. Change the timeout value as follows:
1.
At the printer's front panel, select
2.
Printer
Controls, then press the OK button.
Select
3.
Power Saver
Select
4.
Press the Down Arrow or Up Arrow button to scroll to a selected Power Saver timeout
value. Select a larger value if you want to extend the length of time before the printer goes
into Power Saver mode.
5.
Press the OK button.

Preventing Access to Front Panel Settings

To prevent access to front panel settings, you can lock the front panel
settings from CentreWare IS. A lock icon appears next to items in the front
panel that cannot be accessed by users.
Using CentereWare IS
To set front panel menu preferences:
1.
Launch your web browser.
2.
Enter your printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
3.
Select Properties.
4.
Select the General folder on the left sidebar.
5.
Select Printer Defaults.
6.
Select On or Off from the Front Panel Menu drop-down list.
■
Select On to have all menus available.
Select Off to limit the printer setup items.
■
Pages, then press the OK button.
Printer
Setup, then press the OK button.
Timeout, then press the OK button.
Phaser™ 4500 Laser Printer
1-14
Printer Settings

Advertisement

Table of Contents
loading

Related Manuals for Xerox Phaser 4500

Related Content for Xerox Phaser 4500

This manual is also suitable for:

4500dt - phaser b/w laser printer4500n - phaser b/w laser printer

Table of Contents