Downloading Fonts - Xerox Phaser 4500 Reference Manual

Listing the Fonts from a Mac
Use the Apple Printer Utility to list the fonts available on your printer.
1. If you do not have the Apple Printer Utility on your computer, install it from the Printer
Installer and Utilities CD-ROM.
2. Double-click the Apple Printer Utility icon (in the PhaserTools folder on your
computer's hard drive) to launch the utility.
3. In the Printer Selector dialog box:
a. Under AppleTalk Zones, select your printer's zone.
b. Under Printers, select your printer.
c.
Click Open Printer.
4.
From the File menu, select Print Font Samples.

Downloading Fonts

To supplement the resident fonts (which are always available for printing), downloadable fonts
can be sent from your computer and stored in the printer's memory or on the printer's hard
drive.
Note
If you turn the printer off, the fonts you download to memory are deleted. You must
download them again when you turn the printer on.
Before printing, verify that the fonts specified in your document are installed in the printer or
are set up to download correctly. If your document has a font not currently in your printer, or
downloaded with your print job, a different font will be used.
The printer accepts the following downloadable fonts:
PCL Font Type Support:
■ Type 0
■ Type 10
■ Type 11
■ Type 15
Type 20
■
Postscript Font Type Support:
■ Type 1
■ Type 3
■ Adobe
■ Agfa
Bitstream
■
■ Microsoft
■ Apple
TrueType (Scalable to any point size; looks the same on-screen and printed)
Phaser™ 4500 Laser Printer
1-21
Fonts