Moving And Repacking The Printer; Precautions For Moving The Printer - Xerox Phaser 4500 Reference Manual

Moving and Repacking the Printer

This topic includes:
■ "Precautions for Moving the Printer" on page 4-36
"Moving the Printer Within the Office" on page 4-37
■
■ "Preparing the Printer for Shipment" on page 4-37
For safety information, go to
Documentation CD-ROM.

Precautions for Moving the Printer

Warning
Follow these guidelines to avoid injuring yourself or damaging the printer.
■ Always use two people to lift the printer.
■ Always turn off the printer using the
power switch and unplug all cables and
cords.
■ Always lift the printer from the
designated lift points.
■ Do not place any food or liquids on the
printer.
■ Failure to repackage the printer properly
for shipment can result in damage to the
printer not covered by the warranty,
service agreement, or Total Satisfaction
Guarantee. The Total Satisfaction
Guarantee is available in the United
States and Canada. Coverage may vary
outside these areas; please contact your
local representative for details.
■ Damage to the printer caused by
improper moving is not covered by the
Xerox warranty, service agreement, or
Total Satisfaction Guarantee. The Total
Satisfaction Guarantee is available in the
United States and Canada. Coverage may
vary outside these areas; please contact
your local representative for details.
Copyright © 2004 Xerox Corporation. All Rights Reserved.
Reference/Troubleshooting/User Safety
4-36
Phaser™ 4500 Laser Printer
on the User
21 kg
45 lbs.
4500-071