Printer Hardware Specifications And Requirements Summary - Xerox DocuPrint 100 Installation Planning Manual
Xerox docuprint 100: install guide
Hide thumbs
Also See for DocuPrint 100:
- Software manual (498 pages) ,
- Service manual (304 pages) ,
- Installation planning manual (242 pages)
Table of Contents
Advertisement
Printer hardware specifications and requirements summary
Installation Planning Guide
The following table lists the turning requirements for the feeder/
stacker module.
Table 6-10 Turning radius for feeder/stacker module
Passage or doorway 1 width
29 inches / 73.7 cm
30 inches / 76.2 cm
31 inches / 78.7 cm
32 inches / 81.3 cm
33 inches / 83.8 cm
NOTE: These turning figures are based on inverter/feeder/stacker
dimensions of 28 inches / 71.1 cm by 32.25 inches / 81.9 cm.
The following table summarizes the specifications and electrical
requirements of your printer hardware components.
Printer requirements and specifications
Minimum passage 2 width
33 inches / 83.8 cm
32 inches / 81.3 cm
31 inches / 78.7 cm
30 inches / 76.2 cm
29 inches / 73.7 cm
6- 23
Advertisement
Table of Contents
