Connectivity Requirements; Ethernet Specifications; Token Ring Specifications - Xerox DocuPrint 100 Installation Planning Manual

Week
Post-install Become familiar with support services available.
Establish supplies maintenance procedure.
Provide ongoing system maintenance.
Adjust the printer alignment and magnification.
Order additional documentation, as necessary.

Connectivity requirements

Ethernet specifications

Token Ring specifications

Installation Planning Guide
Activity
.
An Ethernet local area network (LAN) running Transmission
Control Protocol/Internet Protocol (TCP/IP), AppleTalk, or Novell
NetWare software is the network communication system used to
transport documents from the client workstation to the printing
system.
The Ethernet connection to the controller processor must be
compatible with the Institute of Electrical and Electronics
Engineers (IEEE) 802.3 standard.
The Ethernet interface on the controller processor is a 10 Mb/sec
twisted pair standard (10BaseT, 100BaseT, and 1000BaseT).
Attachment Unit Interface (AUI) Coax Ethernet is enabled with an
adapter cable.
Work with your system administrator to assess what type of
network you have and what modifications need to be made to
supply an Ethernet connector to the controller processor.
Users of network client workstations may send print jobs to the
printer using TCP/IP, Novell 3.x, or Apple Talk network protocol.
The Token Ring connection to the controller processor must be
compatible with the Institute of Electrical and Electronics
Engineers (IEEE) 802.3 standard.
The controller processor has a 4 MB or 16 MB Token Ring Auto
interface (16 MB is preferred).
Preparing for installation
Responsibility completed
Customer _________
Customer _________
Customer and _________
Xerox _________
Xerox _________
Customer
Date
4- 5