Error Messages; Xerox 6204 Wide Format Solution - Xerox 6204 Copy/Scan Operation Manual

10 Problem Solving

Error Messages

This section describes how to solve the problem when an error message appears.
Important • Error messages displayed will vary depending on your particular situation and the error
A fault has occurred.
Switch Off the Machine and then
On.
(XXX-XXX)
A fault has occurred.
Press [Restart] to start recovery.
(XXX-XXX)
10
196
involved.
Error Message Cause and Remedy
[Cause] An error occurred.
[Remedy]Turn off the power, wait until the touch screen
goes dark (about 10 sec.), and then turn on
power again.
If the message persists, record the displayed
contents for [(XXX-XXX)]. Switch off the
machine immediately, wait for the touch screen
to go dark, and contact your Xerox Customer
Support Center.
[Cause] An internal error occurred.
[Remedy] Select the [Restart] button on the display.
If the error persists, turn off the power (about 10
sec.), then turn on the power again.
If the message persists, record the displayed
contents for [(XXX-XXX)]. Switch off the
machine immediately, wait for the touch screen
to go dark, and contact your Xerox Customer
Support Center.

Xerox 6204 Wide Format Solution