Xerox 6204 Copy/Scan Operation Manual page 210

10 Problem Solving
The jammed paper is not cut.
Rotate the roll media to reel in the paper. Then,
set the roll media again.
Important • Gently remove the paper, taking care not to
When the jammed paper is not clearly visible
in one of the rolls, even though the roll is
jammed.
Pull out the appropriate roll drawer and remove
the jammed paper.
Important • Gently remove the paper, taking care not to
4
Gently slide Roll 1 or Roll 2 until it is firmly in
position.
5
Close the front cover.
10
202
tear it.
• If paper is torn, check for any torn pieces of
paper inside the machine.
• Manually operate the cutter if necessary. Do
not attempt to rewind the roll.
• For information about loading roll media, refer
to "Loading Media" (P.37).
tear it.
• If paper is torn, check for any torn pieces of
paper inside the machine.
Xerox 6204 Wide Format Solution