3.2
When an Error occurs, the error LED illuminates and the alarm sounds.
If an error occurs refer to the following list, find the corresponding error
message and take the appropriate action.
If the number of characters in the error message is above the capacity for
the control panel screen, the error message will be displayed in separate
parts, with the screen changing about every three seconds.
Error Message
MANUALLY FEED
LETTER (or whatever
size specified)
CLOSE BOTTOM
LEFT UNIT
CLOSE FRONT
COVER
CLOSE MANUAL
TRAY
CLOSE RIGHT TRAY
COVER
CLOSE TOP LEFT
COVER
DISK DEVICE
FAILURE
DISK FILE
OPERATION FAILED
Printer Error Messages
Possible Cause/Action
Cause: There is transparency jammed in the printer.
Action: Pull out the manual feed unit and remove the transparency.
(No OHP orientation sensing)
Cause: The bottom left cover is open.
Action: Shut the lower left cover firmly.
Cause: The front cover is open.
Action. Shut the front cover formly.
Cause: The manual feed unit is open.
Action: Shut the manual feed unit firmly.
Cause: The right cover of the tray module is open.
Action: Shut the right cover of the tray module firmly.
Cause: The top left cover is open.
Action: shut the upper left cover firmly.
Cause: an error has occurred while processing data.
Action: Reprint or turn the power OFF and then on again.
Cause: An error has occurred while processing data.
Action: Reprint.
3
79