Table of Contents
Advertisement
B. OPERATING SEQUENCE
Refer to the chart at right for the proper operating
sequence.
1.
Turn on the whirlpool jets. Adjust each jet for
optimum air/water mixture.
2.
A built-in timer automatically stops the motor after
approximately 20 minutes of operation.
3.
A built-in heater automatically maintains the water
temperature while whirlpool bathing.
Kohler Co., Kohler, WI U.S.A.
ALL 2-HP, VARIABLE FLOW MODELS:
TO
Turn on
whirlpool
massage and
the heater.
Decrease flow by
pressing
key;
increase flow by
pressing
key.
To add air and
Reduce
water to whirlpool
Air and
action, rotate
Water
the flange
counterclockwise.
To reduce air and
water, rotate it
clockwise.
Shut off whirlpool.
Restart whirlpool
after 20 minute
cycle is
complete.
NECK JET EQUIPPED MODELS:
TO
With pump
running and
covered pillow in
place, turn on
neck massage.
Decrease pulsing
action by pressing
key; increase
pulsing action by
pressing
key.
Regulate flow (if
desired) using
pump switch.
Pump
Turn neck jets off.
15
METHOD
OBSERVE
Up/
More
Down/
Less
Add Air
and
Water
METHOD
OBSERVE
Up/
Faster
Down/
Slower
Up/
More
Down/
Less
Neck
114047-2-
BB
Advertisement
Table of Contents
