Plumbing Preparation; Before Installing Unit; Partially Install Bath Drain - Kohler Trocadero K-1312-H1 Installation Information

1. Sunken Installation:
construction is illustrated. Refer to the roughing-in
dimensions for important details.
2. Recessed Installation: Position the plumbing
according to the roughing-in dimensions.
3. Apron Installation: If installing the K-1311 apron,
provide a 59-3/4" (151.6cm) finished opening. A
reference diagram is shown at right.
D. PLUMBING PREPARATION
Position the plumbing according to the roughing-in
dimensions. Cap the supplies, and check for leaks.

6. BEFORE INSTALLING UNIT

A. PARTIALLY INSTALL BATH DRAIN
Install the drain on the whirlpool according to the drain
manufacturer's instructions.
B. PROTECT BATH UNIT
Position a drop cloth or similar material in the bottom of
the unit. Be careful not to scratch the surface of the
product.
BB
114047-2-
Suggested stud
8
Stud Pocket
Header
Nailing Flange
Î Î Î Î
Î Î
Î Î
Provide a 59-3/4" (151.6cm) finished
opening if installing K-1311 apron.
Whirlpool
Apron
Apron
Extrusion
59-3/4"
(151.8cm)
59-3/4" (151.6cm)
Kohler Co., Kohler, WI U.S.A.
1/16" (2mm)
Nominal Gap
Typical
Finished
Wall