Check For Pixel Defects - Eizo CuratOR LX550W Instructions For Use Manual

• Connector to DisplayPort:
– The graphics card of the PC supports communication via the auxiliary channel.
– The graphics card has a DP1.2 output or two DP1.1 outputs.
– The graphics card supports a resolution of 3840 x 2160 pixels (8 MP) in stretched
mode.
– To operate the monitor at the desired resolution, a driver for the graphics card used
must be installed.
If these requirements are met, the monitor is recognized by Windows as a plug-and-play
monitor when it is switched on and the EDID (Extended Display Identification Data) of the
monitor is transferred to the graphics card. You can now configure the resolution based on
the driver or operating system settings.
NOTICE
Installation and parameterization of the video source
Please refer to the video source manufacturer's manual for detailed information about in-
stallation and configuration of the video source.

6.4 Check for pixel defects

Pixel defects (small bright or dark dots) can occur in LCD monitors. During the manufactur-
ing process, all monitors are checked for the permitted number of defective pixels.
Defective pixels cannot be corrected.
CuratOR LX550W
Instructions for Use, 04/2021
Commissioning
6.4 Check for pixel defects
27