Eizo CuratOR LX550W Instructions For Use Manual page 24

Connecting
5.3 Description of the connection procedure
3. Insert the DVI receiver module in a DVI interface and secure it with a holder and two
screws.
Note: The DVI receiver module screws are not fully tightened.
4. Insert the second DVI receiver module in the other DVI interface and secure it with a
holder and two screws.
5. Connect the CAT cables to the DVI receiver module connectors and tighten the clamps.
When connecting the cables, observe the color coding and customer-specific informa-
tion.
6. If you want to use the PiP function, connect the HDMI connector for the emergency sig-
nal (Life) and the additional signal to the PiP connectors.
7. Connect the appliance plug to the monitor power socket.
8. Secure appliance cable with cable ties to the lug to prevent unintentional loosening.
9. Secure the cover on the connection panel with the Combi-Torx screws.
24
DVI receiver module
Screws on DVI receiver module
Instructions for Use, 04/2021
CuratOR LX550W