Power Connector - Eizo CuratOR LX550W Instructions For Use Manual

Connecting
5.2 Device connections
5 V connectors
The monitor has four 5 V outputs that can be used to supply external devices.
DisplayPort and DVI connectors
The monitor has two DisplayPort and two DVI-Dual Link connectors. Digital input signals can
be processed using these connectors. DisplayPort or DVI are the main inputs of the device.
Grounding screw
The additional protective conductor is connected to the grounding screw. It is located in the
connection panel to the upper right.
PiP connector (HDMI connector)
The monitor has two PiP connectors for HDMI connectors, through which an emergency sig-
nal and a signal with additional information can be transmitted.
See also PiP connector (HDMI connector)

Power connector

The device's power supply is connected using an appliance plug.
USB upstream and downstream ports
USB type A and type B are the connectors of the integrated USB hub. There is no connec-
tion to the monitor electronics. The USB downstream ports (type A) enable communication
with external devices. The USB upstream ports (type B) enable communication between the
monitor and a connected PC.
Connectors on underside of unit (for service only)
• USB: USB ports type A or B are used by Service for software updates.
• Serial interface: Service uses the serial interface to connect a photometer.
20
[} 22].
USB Type B (Upstream)
Center fan cover
Serial interface
USB Type A (Downstream)
CuratOR LX550W
Instructions for Use, 04/2021