Messages During Operation - Eizo CuratOR LX550W Instructions For Use Manual

9.3 Messages during operation

The following messages can be displayed when operating the monitor:
Message
No Signal
OSD Locked
OSD Unlocked
Sensor Status Normal
Check with QA SW
Energy Saving Mode
Processing ... Please Wait
Operation Rejected
Operation Successful
Operation Failed
Please close OSD first
Do not turn display off
Pull stick to finish Updates
CuratOR LX550W
Instructions for Use, 04/2021
Description
No valid video signal.
Attempts to open a locked OSD
menu.
Unlocking the OSD menu was
successful
Displayed after a successful
backlight sensor test.
Displayed after a failed backlight
sensor test.
The monitor changes to energy
saving mode.
LUT data is being processed.
The requested operation could
not be executed.
The requested operation was
successfully executed.
Execution of the requested op-
eration was canceled.
A USB stick with update soft-
ware was connected with the
OSD open.
Do not turn off the display dur-
ing an update.
An attempt was made to close
OSD when the USB stick with
update software was connected.
Troubleshooting
9.3 Messages during operation
Remedy
Check the video source connec-
tion.
Locking or unlocking the OSD
menu [} 28]
-
-
Contact service.
-
-
Observe the requirements for
executing the function.
Contact service.
-
Contact service.
Remove the USB stick. Close
OSD.
-
Remove the USB stick. Close
OSD.
41