Audi RS 5 Cabriolet 2013 Owner's Manual page 98

96 Aud i adaptive cruise control and braking guard
Interrupting cruise control
Applies to vehicles: with Audi adaptive cruise control
Fig. 110 Selector leve r
Requirement : adaptive cruise contro l must be
switched on ¢fig.110
(i) .
Overriding cruise control
.. To accelerate ma nually, press the accelera-
tor pedal. The message
ACC override
ap-
pears .
.. To resume adaptive cruise control, remove
your foot from the gas pedal. The system re-
turns again to the speed that was saved be-
fore .
.. You can save a new speed at any time by
pressing the
I SETI
button
¢
page 11, fig. 4.
Canceling cruise control while driving
.. Move the lever into posit ion @ . The mes-
sage ACC standby appears . Or
.. press the brake pedal.
.. To resume the stored speed, move the lever
into position @ .
&_
WARNING
Never resume the stored speed if the
speed is too high for prevailing road, traf -
fic or weather cond itions.
Setting the distance
Applies to vehicles: wit h Audi adapt ive cruise contro l
Fig. 111 Selecto r lever : sett ing the distance
.. Tap the switch to display the current set dis-
tance ¢ fig. 111 .
.. To increase or reduce the d istance by incre-
ments, tap the switch again to the left or
right. The distance between the two vehicles
will change in the instrument cluster dis-
play .
When approach ing a moving vehicle up ahead,
the adaptive cruise control system brakes to
match that object's speed and then ma intains
the stored dista nce. If the vehicle ahead ac-
cele rates, adaptive cruise control will also ac-
celerate up to the stored speed.
The higher the speed, the greater t he distance
in yards (meters)
c:::>
/1..
The
Distance 3
setting
is recommended .
The distances provided are specified values .
Depending on the dr iving situation and the
how the veh icle ahead is driving, the actual
distance may be more or less than these tar-
get distances.
The various symbols for the time increme nt s
appear briefly in t he information line @
¢
page 94, fig. 108 when you change the set-
tings.
c::::,_c::::, ___
Distance 1:
Th is setting corre-
sponds to a distance of 92 feet/28 meters
when traveling at 62 mph (100 km/h), or a
time interval of 1 second.
c::::, __ c::::, __
Distance 2:
This setting corre-
sponds to a distance of 118 feet/36 meters
when traveling at 62 mph (100 km/h), or a
time interval of 1.3 seconds.