Table of Contents
Advertisement
242
Tires and wheels
- Under certain conditions (such as a spor-
ty driving style, winter conditions or un-
paved roads), the pressure monitor ind i-
cator may be delayed.
- Ask your authorized Audi dealer if run-
flat tires may be used on your vehicle.
Your vehicle registration becomes invalid
if you use these tires when not permit-
ted. Damage to your vehicle or accidents
could also result .
@
Tips
- The tire pressure monitoring system
stops working when there is an ESC/ABS
malfunction.
- Using snow chains may result in a system
malfunction .
- The tire pressure monitoring system on
your Audi was developed using tires with
the "ROl" identification on the tire side-
wall ~
page 233.
We recommend using
these tires.
Reset tire pressure monitoring
system
Applies to vehicles: with tire pressure monitoring system
If the tire pressure is adjusted, wheels are ro-
tated or changed, the
TPMS
must be reset via
radio or
MM!* .
.. Before resetting the TPMS, the current pres-
sures of all four tires must correspond to
the specified values. Adjust the tire pressure
and reset the pressure in the tire pressure
monitoring system according to the load
you are carrying
~ page
226 .
.. Turn on the ignition .
.. Select : the
ICAR I
function button
>
Tire pres-
sure monitoring > Store now .
Or
.. Select : the
ICA RI
function button
>
Car sys-
tems* control button
>
Servicing
&
checks>
Tire pressure monitoring > Store tire pres-
sures.
@
Tips
Do not store the ti re pressure if there a re
snow chains on the tire.
Advertisement
Table of Contents
