Table of Contents
Advertisement
keys. Unguarded access to the keys pro-
vides children the opportunity to start
the engine and/or activate veh icle sys-
tems such as the power windows etc. Un-
supervised operation of any vehicle sys-
tem by ch ildren can result in serious in-
jury.
- Do not remove the key from the ignition
lock until the vehicle has come to a com-
plete stop. Otherw ise the steering col-
umn lock cou ld suddenly engage - caus-
ing the risk of an accident.
(D
Tips
- The operation of the remote contro l key
can be temporarily disrupted by interfer-
ence from transmit ters in the vicinity of
the vehicle working in the same frequen -
cy range (e.g . a cell phone, radio equip-
ment).
- For security reasons, replacement keys
are on ly available from Audi dea lers .
- For Decla rat ion of Compliance to United
States FCC and Industry Canada regula-
tions
¢
page
267.
Removing the mechanical key
Fig. 19
Remote master key: remov ing the mechanical
key
.,. Press the release button @
c:>
fig. 19.
.,. Pull the mechanica l key ® out of the master
key.
Using the mechan ical key, you can:
- lock and unlock* the glove compartment
on
t he passenger's side
c:> page
67 .
Op e nin g an d c l os in g
3 3
- lock and unlock the vehicle manually
i:>
page
36 if this should not be possible
with the master key.
- use the ignition key emergency release
¢page
34.
Check light and battery in the master
key
Fig.
20 Remote master key: removing the battery ho ld-
er
Check light in the mast er key
The check light @
i::>
fig. 20
in the master key
provides information about different condi-
tions.
.,. The check light turns on br iefly once when a
button is pressed, and during an "inquiry"
by the convenience key system.
.,. If the check light does not come on, the bat-
tery is dead and has to be rep laced. In addi-
tion, when the batte ry is dead
the m
indica-
tor light appears in the inst rument cluste r
disp lay as well as the message Please
change key battery.
Master key battery replacement
.,. Remove the mechan ica l key
c:>page
33 .
.,. Press the release button @
c:>
fig.
20on the
bat t ery ho lder and at the same t ime pull the
battery ho lder out of the master key in the
direction of the arrow .
.,. Insta ll the new battery CR 2032 with the
" +" sign facing down .
.,. Push the battery holder carefully into the
master key.
.,. Install the mechanical key.
Advertisement
Table of Contents
