Table of Contents
Advertisement
60
Clear v ision
Adjusting the magnetic zone
Appl ies t o vehicles: with digital compass
The magnetic zone must be adjusted correctly
for the compass to read accurately .
Fig. 67 North Amer ica: magnet ic deflect ion zone
boundar ies
• Press and ho ld the button @ ¢
fig.
67 until
the number of the magnetic zone appears in
the rearview m irror.
• Press the button @ repeated ly to select the
correct magnetic zone. The select ion mode
tu rns off afte r a few seconds.
Calibrating the compass
Appl ies to vehicles: with digital compass
You must recalibrate the compass if it does
not display the correct direction.
• Press and ho ld the button @ until a C ap-
pears in the rearview mirror.
• Drive in a circle at about 6 mph (10 km/h)
until a direction is d isp layed in the rearview
mirror .
.&,
WARNING
- To avoid endangering yourself and other
dr ivers, calibrate the compass in a n a rea
where the re is no traff ic.
- The digital compass is to be used as a di-
rectional aid on ly. Even though you may
want to look at it while you are dr iving,
you must still pay attention to traffic,
road and weather conditions as we ll as
other possible hazards.
Advertisement
Table of Contents
