M.2 Configuration - Siemens SIMATIC IPC BX-56A Operating Instructions Manual

3.4.11

"M.2 Configuration"

Calling "M.2 Configuration"
Select: "Setup Utility (Page 10)" > "Advanced" > "M.2 Configuration".
Firmware
setting
M.2 Port 1 (X8100)
NOTICE: M.2 Port 1 (X8100) is unavailable for IPC BX-56A.
PCIE (BUS:xx Present/Not
Device:xx
Present
Function:xx)
PCIe Express Enabled
Port Enable
Disabled
PCIe Max Link
Speed
Detect Timeout [Number]
M.2 Port 2 (X100)
PCIE (BUS:xx Present/Not
Device:xx
Present
Function:xx)
PCIe Express Enabled
Port Enable
Disabled
PCIe Max Link
Speed
Detect Timeout [Number]
USB3 port in Enabled
M.2
Disabled
M.2 Port 3 (X101)
PCIE (BUS:xx Present/Not
Device:xx Present
Function:xx)
PCIe Express Enabled
Port Enable
Disabled
Firmware/BIOS description (SIMATIC IPC BX-56A, IPC BX-59A)
Operating Instructions, 10/2023, A5E52427534-AA
Value Setting in
delivery state
BX-56A BX-59A
Auto
Gen1
Gen2
Gen3
Gen4
x
Auto x
Gen1
Gen2
Gen3
0
x
The PCIE bus device function is present or not.
x The PCIe Express Port is enabled.
The PCIe Express Port is disabled.
x Maximum possible link speed.
The link speed is limited to GEN 1.
The link speed is limited to GEN 2.
The link speed is limited to GEN 3.
The link speed is limited to GEN 4.
0 The number of milliseconds reference code will wait for link to
exit Detect state for enabled ports before assuming there is no
device and potentially disabling the port.
The input range is from 0 to 65535.
The PCIE bus device function is present or not.
x The PCIe Express Port is enabled.
The PCIe Express Port is disabled.
x Maximum possible link speed.
The link speed is limited to GEN 1.
The link speed is limited to GEN 2.
The link speed is limited to GEN 3.
0 The number of milliseconds reference code will wait for link to
exit Detect state for enabled ports before assuming there is no
device and potentially disabling the port.
The input range is from 0 to 65535.
Enable or disable the USB3 port in M.2 slot.
NOTICE:
x
USB3 port in M.2 is unavailable for IPC BX-56A.
The PCIE bus device function is present or not.
x The PCIe Express Port is enabled.
The PCIe Express Port is disabled.
Configuring firmware
3.4 "Advanced" tab
Meaning
19