Sata Configuration; Extension Module Configuration - Siemens SIMATIC IPC BX-56A Operating Instructions Manual

3.4.13

"SATA Configuration"

Calling "SATA Configuration"
Select: "Setup Utility (Page 10)" > "Advanced" > "SATA Configuration".
Firmware
Setting
Serial ATA Port [Empty]/[Drive
(X9001) name]
Software
SUPPORTED/Unk
Preserve
Port Enabled
Enabled
Hot Plug Enabled
Disabled
3.4.14

"Extension module Configuration"

Calling "Extension module Configuration"
Select: "Setup Utility (Page 10)" > "Advanced" > "Extension module Configuration".
Firmware
setting
PCI Express Slot (X301)
PCIE (BUS:xx Present/Not
Device:xx Presented
Function:xx)
PCIe Express Enabled
Port Enable
Disabled
PCIe Max Link
Speed
Detect Timeout [Number]
PCI Express Slot (X302)
PCIE (BUS:xx Present/Not
Device:xx Presented
Function:xx)
Firmware/BIOS description (SIMATIC IPC BX-56A, IPC BX-59A)
Operating Instructions, 10/2023, A5E52427534-AA
Value Setting in
delivery state
BX-56A BX-59A
nown
x
x
Value Setting in
delivery state
BX-56A BX-59A
x
Auto x
Gen1
Gen2
Gen3
Gen4
0
x Enable or disable SATA Port.
x Designate this Port as Hot Pluggable or not.
The PCIE bus device function is present or not.
x Control the PCI Express Root Port.
x Configure PCIe Speed.
0 The number of milliseconds reference code will wait for link to
exit. Detect state for enabled ports before assuming there is no
device and potentially disabling the port.
The input range is from 0 to 65535.
The PCIE bus device function is present or not.
Configuring firmware
3.4 "Advanced" tab
Meaning
Meaning
21