Efi - Siemens SIMATIC IPC BX-56A Operating Instructions Manual

Firmware setting
NVME Boot
SATA Boot
Timeout [Number]
EFI (Page 29)
3.7.1

"EFI"

List of boot media.
Calling "EFI"
Select: "Setup Utility (Page 10)" > "Boot" > "EFI".
• If "Add Boot Options" = "Auto", the boot media is grayed out and cannot be changed.
• If "Add Boot Options" = "First" or "Last", the following can be changed:
– Sequence of the boot media: <F6>, <F5> or <+>, <-> keys
– List of valid boot media: <Enter> key
Firmware setting
EFI USB Device
EFI Network x for IPv4
Windows Boot Manager (M.2)
Firmware/BIOS description (SIMATIC IPC BX-56A, IPC BX-59A)
Operating Instructions, 10/2023, A5E52427534-AA
Value Setting in delivery
state
Enabled x
Disabled
Enabled x
Disabled
0
Meaning
EFI boot order settings.
x Booting from NVME devices is permitted.
Booting from NVME devices is not permitted.
x Booting from SATA devices is permitted.
Booting from SATA devices is not permitted.
0 Delay time in seconds during booting so that the user has
time to press the hotkey to open the firmware selection
menu.
The input range is from 0 to 1800.
EFI Boot Order Settings.
Configuring firmware
3.7 "Boot" tab
Meaning
29