Configuration Plan - Siemens SIMATIC IPC277G Operating Instructions Manual

1.1.2

Configuration plan

Chipset
•
Processor
•
•
•
Main memory Memory expansion up to 16 GB with the following memory modules:
•
•
•
The max speed of memory is up to 3200 MT/s.
The processor supports IBECC (In-Band-Error-Correction-Code), and its default value in BIOS is
"Disable".
Expandability
•
Graphics
•
Power supply
•
Drives and storage media
M.2 NVMe/SATA SSD •
•
•
M.2 Module
•
Interfaces
Ethernet
•
The device with the Intel Atom® x6414RE Processor supports TSN.
COM (optional)
•
USB (external)
•
USB (internal)
•
DisplayPort
•
•
Keyboard, mouse Connection through USB port
Operating systems
Operation Systems
•
•
The 240G/480G SSD has the Power loss protection (PLP).
1
These configurations are not released in the current version. For the detailed
configuration, refer to the Technical data (Page 83).
In the BIOS setup, you can configure support of RS232/RS422/RS485 for each COM port.
2
DP++ is a DisplayPort Dual-Mode, and it supports HDMI/DP signal output.
3
MUI: Multi-language user interface; More language packages are available on the USB
4
stick. You can install them according to your request.
SIMATIC IPC277G
Operating Instructions, 08/2021, A5E50059956-AA
Intel Atom® x6000E series
Intel Atom® x6211E Processor (up to 3.0 GHz)
Intel Atom® x6413E Processor (up to 3.0 GHz)
Intel Atom® x6414RE Processor (1.5 GHz)
4G DDR4 SDRAM
8G DDR4 SDRAM
16G DDR4 SDRAM
2 × M.2 Key B connector
Intel® UHD Graphics
24 VDC (19.2 to 28.8 V)
256GB Eco SSD
240GB SSD
1
480GB SSD
1
Support 2 × M.2 Module on the motherboard
3 × RJ45 Ethernet 10/100/1000 Mbps
2 × RS232/RS422/RS485
2
4 × USB 3.1 Gen2 (up to 10 Gb/s)
2 × USB2.0 (500 mA) pin header
Connection of a digital monitor, support DisplayPort Standard Version 1.4
2 × DP++ , support resolution up to 4096 × 2160 pixels at 60 Hz
3
Without OS
Windows 10 Enterprise 2019 LTSC (Long Term Servicing Channel) 64-bit (MUI)
Overview
1.1 Product description
4
9